The Manual model of `ELECTROMIZER’ is a Fully Manually Operated version consisting of the following : 

1. Isolators (in the form of SFU / MCB / MCCB or plain Kit-Kat fuses) at the input and /       or output for switching load `ON' or `OFF' as also to isolate load as and when     required for the purpose of maintenance.

2. Monitoring / Indicating devices like Phase Indicating LEDs, Voltmeter , Ammeter,          KWH Meter, KW Meter, Frequency Meter, and / or any other.

3. Manually operated Tap Changer and Bypass switches.

4. Terminations and other connections at bus-bars / connectors etc.

Generally the `ELECTROMIZER’ panel is made out of 14 /16 gauge CRCA sheets duly powder coated for long life and corrosion resistance. The workmanship is of the highest quality with all internal cabling done to meet or exceed accepted standards in terms of bunching, glanding, lugging, ferruling, channeling, insulating and bolting / termination. Similarly, only the best brands of switchgear / cables like L & T, Siemens, GE-Alstom, Asian, Switchon, Polycab, Finolex, Automatic Electric, Meco, Enercon, etc. are used. Special attention is also paid to incorporation of safety norms as defined in relevant standards.

IMPORTANT NOTE : In all our models, while the basic heart of the equipment remains the same viz. the `ELECTROMIZER’ reactance coils, all other components of switchgear, safety, operation and monitoring are add-ons depending on every customer's specific requirements. As a matter of policy, we do not make an offer before fully understanding the customer's requirements in detail.